Filter
Top Products
4
Important Safety Information
RCR1542 and RCR1548 Rotary Cutters 312-556M
11/25/15
Table of Contents
Safety Labels
Your Rotary Cutter comes equipped with all safety labels in
place. They were designed to help you safely operate your
implement. Read and follow their directions.
1. Keep all safety labels clean and legible.
2. Refer to this section for proper label placement. Replace
all damaged missing labels. Order new labels from your
nearest Land Pride dealer. To find your nearest dealer,
visit our dealer locator at www.landpride.com.
3. Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
4. Refer to this section for proper label placement.
To install new labels:
a. Clean surface area where label is to be placed.
b. Spray soapy water onto the clean area where label will
be placed.
c. Peel backing from label and press label firmly onto the
surface.
d. Squeeze out air bubbles with the edge of a credit card
or with a similar type of straight edge.
818-543C
Danger PTO Shield
26578
818-556C
Danger Thrown Object
818-564C
Chain Guard
35892
35892