Land Pride RC35 Series Brush Cutter User Manual


 
8
Introduction
RC15, RC25, and RC35 Series Rotary Cutter 312-298M 9/25/08
Land Pride
Table of Contents
Introduction
For prompt service always use the serial number and
model number when ordering parts from your Land Pride
dealer. Be sure to include your serial and model numbers
in correspondence also.
Your dealer wants you to be satisfied with your new ma-
chine. If for any reason you do not understand any part of
this manual or are not satisfied with the service received,
the following actions are suggested:
1. Discuss the matter with your dealership Service Man-
ager make sure he is aware of any problems you may
have and that he has had the opportunity to assist
you.
2. If you are still not satisfied, seek out the Owner or
General Manager of the dealership, explain the prob-
lem and request assistance.
3. For further assistance write to:
Product Support
Land Pride, Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
Serial Number Plate Location
Figure 1
15025
14495
Model RC15 & RC25
Model RC35
Land Pride welcomes you to the growing family of new
product owners. This implement has been designed with
care and built by skilled workers using quality materials.
Proper assembly, maintenance, and safe operating prac-
tices will help you get years of satisfactory use from the
machine.
Using This Manual
This Operator’s Section is designed to help familiarize you
with safety, assembly, operation, adjustments, trouble-
shooting, and maintenance. Read this manual and follow
the recommendations to help ensure safe and efficient op-
eration.
The warranty sheet should be filled out by the owner and
dealer at the time of purchase. After completion give the
dealer the white copy and send the pink copy to Great
Plains. Keep your copy in the manual for use when corre-
sponding with the dealer.
To order a new Operator or Parts Manual contact your au-
thorized dealer or write to the address listed below in the
Owner Assistance paragraph. Include the model and seri-
al numbers of your unit.
The information contained within this manual was current
at the time of printing. Some parts may change slightly to
assure you of the best performance.
Terminology:
"Right " or "Left" as used in this manual is determined by
facing the direction the machine will travel while in use un-
less otherwise stated.
Definitions:
IMPORTANT: Information, related to it’s proceeding topic,
that the author feels would be of use.
Owner Assistance
If customer service or repair parts are required contact
your local Land Pride dealer. He has trained personnel, re-
pair parts, and the equipment needed to service your im-
plement.
These parts have been specially designed and should
only be replaced with genuine Land Pride parts.
Serial Number Plate
Refer to the Figure 1 for the location of your serial number
plate.
NOTE: A special point of information related to it’s
preceding topic. The author’s intention is that you
read and note this information before continuing.