Filter
Top Products
30
Section 5: Maintenance and Lubrication
AFM4214 and AFM4216 All-Flex Grooming Mowers 315-587M
11/14/08
Land Pride
Table of Contents
Storage
It is good practice to clean off any dirt and grease that
may have accumulated on the mower and moving parts
before storing the mower for a long period and at the end
of a working season.
1. Clean off any dirt and grease that may have
accumulated on the mower and moving parts.
Scrape off compacted dirt from the bottom of the deck
and then wash surface thoroughlywith a garden hose.
A coating of oil may also be applied to the lower deck
area to minimize oxidation.
2. Check blades for wear and replace or sharpen if
necessary. Refer to “Blade Sharpening” on page 26.
3. Inspect mower for loose, damaged or worn parts and
adjust or replace as needed.
4. Lubricate as noted in “Lubrication Points” starting on
page 31.
5. Release spring tension from drive belt. Refer to
“Blade Removal And Installation” on page 25.
6. Repaint parts where paint is worn or scratched to
prevent rust. Ask your dealer for Aerosol Land Pride
touch-up paint. They are also available in touch-up
bottles with brush, quarts and gallon sizes by adding
TU, QT or GL to the end of the Aerosol part number.
7. Store mower in a clean, dry place.
Land Pride Aerosol Touch-up Paint
Part No. Part Description
821-011C PAINT LP BEIGE AEROSOL SPRAY CAN
821-002C PAINT LP BLACK AEROSOL SPRAY CAN
821-054C PAINT MEDIUM RED AEROSOL SPRAY CAN
821-058C PAINT GREEN AEROSOL SPRAY CAN
821-066C PAINT ORANGE AEROSOL SPRAY CAN
821-067C PAINT BLUE AEROSOL SPRAY CAN
Tires With Air Pressure
Tire Sealant: Heavy Duty tire sealant has been added in
air tires to help reduce air loss from punctures due to
nails/thorns etc. See tire sidewall for optimum tire
pressure.
NOTE: Under inflated tires can roll off of rim.
Maintaining air pressure within 5 PSI of maximum
tire pressure reduces the risk of tires rolling off of
rim.