Filter
Top Products
2
Manual No. 700-520M 3/20/07
Land Pride
Assembly Instructions
■
Left Side Panel Detachment
The fuse box on the left side panel can interfere with
removing and assembling the CVT enclosure. It is simpler
to detach the side panel from the frame than to detach the
fuse box.
Refer to Figure 1:
1. Remove five 1/4" hex flange lock nuts (#3) and 1/4"
Phillip head machine screws (#2). Allow the side
panel to hang from its wiring harness.
2. Lift side panel (#1) with fuse box and wiring harness
out of the way when removing and installing driveline
components that interfere.
Removal of Exhaust Heat Shield
Refer to Figure 2:
1. Remove existing #8 x 1/2" hex screws (#3) and
exhaust heat shield (#5). Save for reattachment.
Removal of Air Hoses & Outer Enclosure
The following removed components will not be reused in
assembly of the new CVT drive.
Refer to Figure 2:
1. Loosen hose clamp (#1A) and remove exhaust air
hose (#7).
2. Loosen hose clamp (#1B). Remove 1/4" Phillips
head self-tapping drive screws (#4), intake air hose
(#9) and snorkel (#8).
3. Remove twelve 1/4" x 3/4" Phillips head screws (#2)
and outer enclosure (#6).
Side Panel Removal
Figure 1
22416
CVT Venting Removal
Figure 2