Filter
Top Products
5
Introduction
2/23/09
Model SBR48, SBR60 & SBR72 Seed Bed Roller 322-215M
Land Pride
Table of Contents
Terminology
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions
Owner Assistance
The Warranty Registration card should be filled out by
the dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
If customer service or repair parts are required contact a
Land Pride dealer. A dealer has trained personnel, repair
parts and equipment needed to service the Seed Bed
Roller.
The parts on your Seed Bed Roller have been specially
designed and should only be replaced with genuine Land
Pride parts. Therefore should your Seed Bed Roller
require replacement parts go to your Land Pride Dealer.
Serial Number Plate
For prompt service always use the serial number and
model number when ordering parts from your Land Pride
dealer. Be sure to include your serial and model numbers
in correspondence also. Refer to Figure 1 for the location
of your serial number plate.
Serial Number Plate Location
Figure 1
NOTE: A special point of information that the
operator must be aware of before continuing.
IMPORTANT: A special point of information related
to its preceding topic. Land Pride’s intention is that
this information should be read and noted before
continuing.
25763
Introduction
Land Pride welcomes you to the growing family of new
product owners. This Seed Bed Roller has been
designed with care and built by skilled workers using
quality materials. Proper assembly, maintenance and
safe operating practices will help you get years of
satisfactory use from the machine.
Application
The Land Pride SBR48, SBR60 and SBR72 Three-point
hitch or Pull-Type Seed Bed Rollers have uses and
applications in landscaping, sports field maintenance,
pasture maintenance, professional turf care, general
seeding and overseeding applications around home
sites, construction sites, horse paddocks, nurseries, sod
farms, and small farm or ranch operations. These Seed
Bed Rollers will break up smaller clumps and dirt clods,
while pressing applied seed into firm contact with the soil
profile for greatly improved germination rates. The
notched profile of the rollers also develops a pattern of
uniformly spaced mini-furrows that tend to hold seed and
fertilizer in place. These small furrows also retain
essential moisture, and resist erosion from the wind and
the runoff from applied irrigation or rain.
The Seed Bed Roller also can also serve as the roller
packer attachment of Land Pride’s complimented
Seeder/Overseeder system. This system is comprised of
a Land Pride Disc Harrow with a rear mounted Spin
Spreader and special hitch kit, a trailing 6’ x 4’ DRG06
Drag Harrow, and trailing Pull-type SBR72 Seed Bed
Roller. This componentized Seeder/Overseeder system
provides for one-pass ground cultivation and seed to soil
integration for applications on previously tilled soil,
existing pasture ground, large grassy areas, reclamation
sites, or wild game food plots.
See “Section 6: Specifications & Capacities” on page
19 and “Section 7: Features and Benefits” on page 20
for additional information and performance enhancing
options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
• The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
• To order a new Operator’s or Parts Manual contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge from our website at
www.landpride.com.