Filter
Top Products
25
2. Confirm with the SET key and enter the Relative air pressure
value setting.
Note:
Units of weather icon sensitivity and air pressure history are not affected.
They are always expressed in hPa.
RELATIVE AIR PRESSURE VALUE SETTING
The default relative pressure value is 29.92 inHg (1013 hPa). This can be
manually set to another value within the range of 28.35 – 30.72 inHg (960
– 1040 hPa) for a better reference.
1. The current relative pressure value will start flashing
2. Use the OUT/+ key to increment and IN key to decrement the
value. Holding the key allows the value to advance faster.
3. Confirm with the SET key and enter the Weather forecast icon
sensitivity setting.
Flashing
26
WEATHER FORECASTING ICON SENSITIVITY SETTING:
For locations with rapid changes of weather conditions, the weather icons
sensitivity can be set to a different level for faster display of weather
conditions.
1. The current sensitivity value will start flashing.
2. Use the OUT/+ key to set the weather sensitivity level. There are 3
levels of setting: 2, 3 and 4. The value corresponds to the change
of air pressure in hPa before the weather icon will switch to another
state. Level 2 is the most sensitive setting (coastline); level 4 is the
slowest (desert) recording setting (default setting is "3").
3. Confirm with the SET key and exit the Manual settings.
Flashing
27
TO EXIT THE MANUAL SETTING MODE
To exit the manual setting mode anytime during the manual setting, press
the SNOOZE/CH key or wait for automatic timeout. The mode will return
to normal time display.
ALARM SETTING:
The alarm time can be set when pressing the ALM/DATE key.
1. Press and hold the ALM/DATE key to enter the alarm set mode.
The alarm digits flash.
2. Use the IN key to set the alarm hour.
3. Use the OUT/+ key to set the alarm minute.
4. Confirm with SNOOZE/CH key and exit the Alarm setting. The
icon ((●)) will be displayed along with the set alarm time.
Note: If the calendar is displayed in the Weather station, the alarm is
NOT active.
A
larm icon
A
larm time
28
To view and activate the alarm, press the ALM/DATE key. The
alarm icon (()) and the alarm time will be displayed, indicating that
the alarm setting is activated.
The maximum alarm ring duration is 2 minutes.
SNOOZE SETTING AND STOPPING THE ALARM:
The 10 minute snooze function can be set when the alarm is ringing by
pressing the SNOOZE/CH key.
When the alarm is snoozing, the alarm icon (()) will remain flashing
indicating that the alarm is active but is in Snooze mode. To stop the
snooze function when it is in snooze period, press any key except the
SNOOZE/CH key.
To stop the alarm, press any key (except for SNOOZE/CH) while the
alarm is ringing.
MOON PHASES SYMBOL
The Moon icon of the Weather station will also display all 12 Moon
phases throughout the year according to the set calendar.