Filter
Top Products
Page| 21
The 1hour, 24-hour, week, month or total rainfall measurement is displayed in the unit of inch or mm.
For all measurements, it is important time and date are set correctly on your display.
• 1-HOUR RAIN: The 1-hour rain reflects rain that has fallen from current time and back 1-hour. It
updates every four minutes (15 measurements). The hour is not a fixed clock time measurement. It is
literally an ongoing “last 60 minutes” timer.
• 24-HOUR RAIN: The 24-hour rain reflects the rain that has fallen from current time and back 24-
hours. This is not a midnight to midnight measurement. The day is not a fixed clock time
measurement. It is literally an ongoing “last 24 hours” timer.
• WEEKLY RAIN: The amount of rainfall of the previous week. Week: Rain total for the week is reset
every 7 days. Week begins 1 day before the day the batteries are first inserted into the weather
station. For example, if the batteries are inserted on a Thursday, the start of the weekly totals will be
Wednesday of each week.
• MONTHLY RAIN: Monthly rain reflects the previous month’s rain and will update 12AM the first day
of the month.
• TOTAL RAIN: Total rain will remain until you manually reset this value. Total rain reflects the rain
from time of display set-up until you manually reset the total rain.
Note: RESET RAIN: Press and release the MIN/MAX button until the display shows the Total
Rainfall value. Press the ▲/DATE button. The total rainfall amount will be reset to 0, and the
time updated to current time.
MIN/MAX WEATHER DATA
The weather station will automatically record the maximum and minimum value of the various weather
data with time and date of recording. Press and release the MIN/MAX button to view the following stored
maximum and minimum weather data:
1. MIN/MAX indoor temperature with the date and time of recording
2. MIN/MAX indoor humidity with the date and time of recording
3. MIN/MAX outdoor temperature with the date and time of recording
4. MIN/MAX outdoor humidity with the date and time of recording
5. MAX wind gust with the date and time of recording
6. Total rainfall with the date the rainfall total was last reset.
Note: If the rainfall total has not yet been reset, "---. --. ---- will be displayed for the date.
RESET THE MIN/MAX WEATHER DATA
1. Press MIN/MAX button to show the desired weather data.
2. Press ▲/DATE button. The stored value will be reset to the current value and current time.
Note: Each MIN or MAX weather data value will need to be reset independently.
RESET TOTAL RAINFALL AMOUNT
The total rainfall measurement is displayed in the unit of mm or inch. It shows the total rainfall
accumulated since last reset of the total rainfall amount.
In either Mode 1 or Mode 2 display, press and release the MIN/MAX button until the display shows the
Total Rainfall value.
Press the ▲/DATE button to reset the Total Rainfall reading on the display. The total rainfall amount will
be reset to 0, and the time is updated to current time.