Filter
Top Products
Page| 16
5. Press the SET button to switch the alarm on or off. The icon indicates the alarm is switched
on.
6. Press the ALARM button once. The low indoor humidity alarm display will show.
7. Press and hold the SET button for about 2 seconds. The humidity
digit will flash.
8. Press the ▲/DATE button or ▼/RAIN button to set the low indoor
humidity alarm value.
9. Press the ALARM button to confirm the setting. The digit will stop
flashing.
10. Press the SET button to switch the alarm on or off. The
icon
indicates the alarm is on.
11. Press the ALARM button to move to the outdoor temperature alarms.
OUTDOOR TEMPERATURE ALARMS:
1. The high outdoor temperature alarm display will show.
2. Press and hold the SET button for about 2 seconds. The temperature
digit will flash.
3. Press the ▲/DATE button or ▼/RAIN button to set the high outdoor
temp alarm value. Hold the button in to change the value faster.
4. Press the ALARM button to confirm the setting. The digit will stop
flashing.
5. Press the SET button to switch the alarm on or off. The
icon
indicates that the alarm is switched on.
6. Press the ALARM button once. The low outdoor temperature alarm
display will show.
7. Press and hold the SET button for about 2 seconds. The temperature
digit will flash.
8. Press the ▲/DATE button or ▼/RAIN button to set the low outdoor
temp alarm value. Hold the arrow button in to change the value
faster.
9. Press the ALARM button to confirm the setting. The digit will flash.
10. Press the SET button to switch the alarm on or off. The
icon
indicates the alarm is switched on.
11. Press the ALARM button to move to the outdoor humidity alarms.
OUTDOOR HUMIDITY ALARMS:
1. The high outdoor humidity alarm display will show.
2. Press and hold the SET button for about 2 seconds. The humidity
digit will flash.
3. Press the ▲/DATE button or ▼/RAIN button to set the high outdoor
humidity alarm value.
4. Press the ALARM button to confirm the setting. The digit will stop
flashing.
5. Press the SET button to switch the alarm on or off. The
icon
indicates the alarm is switched on.
6. Press the ALARM button once. The low outdoor humidity alarm
display will show.
7. Press and hold the SET button for about 2 seconds. The humidity
digit will flash.
8. Press the ▲/DATE button or ▼/RAIN button to set the low outdoor
humidity alarm value.
9. Press the ALARM button to confirm the setting. The digit will stop
flashing.
10. Press the SET button to switch the alarm on or off. The
icon
indicates the alarm is switched on.
11. Press the ALARM button to move to the wind gust alarm.