Filter
Top Products
6
CFI230G
23
CFI230G
Remove wall channel from jamb and place
against mark on wall
Adjust wall jamb until glass is parallel to the
edge of the tray ‘A’. When jamb is vertical mark
edge of wall channel on the wall ‘B’.
A
B
STEP
1
ENCLOSURE INSTALLATION
Non Water Delivery Side only
Loosely fit wall channel into glass panel jamb
STEP
2
STEP
4
STEP
3
Carefully lift the assembly onto the tray. The end
of the glass panel fits into slot ‘A’ on the tray.
The wall channel end sits on the flat section of
the tray ‘B’
A
B
Handset Adjustment
To adjust the height of the handset press
the release button ‘A’ and slide the clamp
bracket assembly up or down to the
desired position.
The handset can be moved both vertically
and horizontally until the desired position
is reached ‘B’. A friction mechanism in the
clamp bracket will hold the handset in
place.
1
2
3
4
A
B
Fixed Head Adjustment
Move the spray head to the required
position. The spray head is adjustable in
both the horizontal and vertical
directions.