Filter
Top Products
Figure 15 Figure 16
5) Put on the BACK PANEL
Remove the gum paper on the clamps, place the BOTTOM PANEL in the correct direction and click
on tightly.
Align clips with LEFT/RIGHT PANEL and secure in place by fastening them. (see figure 17~18)
Figure 18
Figure 17
6) BUCKLE CONNECTIONS
How to connect panels using the buckles (see figures 5 to 7)
Figure 7
R
7)
Instal
g it over the horizontal bench guides on the side panels. Push the
Figure 5 Figure 6
DO NOT USE THE BUCKLES TO FORCE THE PANELS TOGETHE
l the bench panel
Install the bench panel by slidin
bench all the way in until it can touch the BACK PANEL and is securely in place. Make sure of the
bench position so that the smooth and finished side of the bench are facing up and forward. (see
figure 19)