Filter
Top Products
Figure 3
MAIN POWER main power of the sauna room
HT1, HT2, heaters power output cable
READING LAMP reading lamp power output cable
CTRL PANEL control panel connecting
CD/SIG signal cable group
10) COMPONENT MARKINGS
For easy and proper installation, please read the information below thoroughly to make sure all
connections are correct. (see form 1)
MARKING COMPONENT CONNECTION
POWER Power cord
FUSE Fuse (15A) (reset)
HT1, HT2 Heater power cord
LIGHT Reading lamp connector
CTRL Control panel connecting
L/SPEAKER Left speaker plug
R/SPEAKER Right speaker plug
BUZZER Buzzer plug
TEMP SENSOR Temperature sensor
Form 1
Please read the operating instructions carefully before assembly. 2 adults are required for the
sauna installation.
The power cord is taken out of the TOP COVER, do not plug in power during installation.
Figure20 Figure 21
11) Connect all the plugs on the TOP PANEL
1>. Plug in according to the respective label. (see figure 23-25)
2>. Connect the CTRL plug from the CONTROL BOX and CTRL plug from the CONTROL PANEL, then screw