Filter
Top Products
English – 11
DESCRIPTION
FIG. 6
FIG. 7
FIG. 8
FIG. 5
Chain oil tank (FIG. 5)
Chain sawmill with electric motor
On the saw carriage for sawmills that are fitted with an
electric motor, the oil tank (25) for chain oil is located
on the electric motor. The chain oil is pumped via a
hose by a chain oil pump that is installed under the
clutch drum in the console. The pump supplies the bar
with chain oil when the sawmill is running.
25
A
9
A
Feed unit for chain sawmill with
electric motor (FIG. 8)
The feed unit (A) is installed in the left-hand end of the
rail profile and is connected to the saw carriage by a
cable. The chain is started from the feed unit and the
feeding speed can be controlled variably.
Vibration damping plate for the
chain saw (FIG. 7)
The chain saw is secured in a vibration-free plate (9)
that is screwed into the saddle. The vibration-free plate
is supplied with an adjustment option, where the
position of the saw in relation to the rails can be
adjusted. The saddle is installed in the saw carriage
and is adjusted vertically with an idler adjustment
screw.
Bar and chain (FIG. 7)
The bar and chain (A) are installed on the engine
console (electric sawmill) and installed on the chain
saw in accordance with the chain saw’s operator’s
manual. The bar has the same mounting on both the
sawmill with the chain saw and the electric saw mill.
Motor console for electric motor
(FIG. 6)
The chain sawmill with electric motor is fitted with a
console in which the motor, transmission and bar are
installed. The console is installed in the saw carriage
and is adjusted vertically with the idler adjustment
screw. The console runs on skid rails with adjustable
plastic guides.