Filter
Top Products
Storage - 16
STORAGE
St orage
Storage
1. Remove the bagger from the machine.
2. Empty and clean the hopper, chute and bags.
3. Remove any ballast used during bagging. This will
ensure proper operation of the mower when the bagger is
not used.
4. If you are using a special mower blade for bagging,
remove it and use the correct mower blade.
5. Replace missing or damaged parts. Make sure all
hardware is secure.
6. Paint scuffed metal surfaces to prevent rust.
7. If possible, store the bagger in a cool, dark place. If it
must be stored outside, put a weather-proof cover over it.
Removing From Storage
1. Remove bagger from storage and clean if necessary.
2. Install bagger.
3. Install the proper ballast.
4. If you are using a special mower blade for bagging,
make sure it is installed.