Filter
Top Products
Removing - 8
REMOVING
Removing
Removing Chute
42-Inch Mower Decks
MX10382
1. Unhook rubber strap latch (A) connecting upper chute to
lower chute. Remove upper chute (B).
MX10316
2. Release rubber strap latch (E).
3. Slide lower chute back to release rod (D) from keyhole
(C).
4. Lift discharge chute deflector and remove lower chute
from mower.
48-Inch Mower Decks
MX10382
1. Unhook rubber strap latch (A) connecting upper chute to
lower chute. Remove upper chute (B).
MX10381
2. Unhook rubber strap latch (C) holding lower chute
assembly to mower deck.
MX10374
3. Slide discharge chute back to release wireform (D).
4. Lift discharge chute deflector and remove lower chute
from mower.
Removing Bagger
1. Open hopper top and remove both bags.
2. Empty all debris from bags.
3. Inspect bags for wear and deterioration, replace when
necessary.
4. Remove spring locking pin and drilled cargo pin.
5. Remove bagger support rod by lifting ends out of holes
in rear cargo mounts.
6. Remove mounting post from rear hitch plate.
7. Install drilled cargo pin and spring locking pin to
mounting post for storage.
A
B
C
D
E
A
B
c CAUTION: Avoid injury! To prevent injury from
thrown objects, inspect bags frequently for
wear and deterioration. Check bags frequently
and replace when necessary.
C
D