Filter
Top Products
SAFETY PRECAUTIONS- continued
OM 0391SB1274-A 9
MAINTENANCE
1. Park the tractor/snowblower on level
ground, set the parking brake, disengage
the PTO, shut off the engine, remove the
key, and lower the implement to the ground
BEFORE making any snowblower
adjustments.
2. To avoid injury, do not adjust, unclog or
service the snowblower with the tractor
engine running. Making sure rotating
components have completely stopped
before leaving the operator’s seat
3. Keep the tractor/snowblower clean. Snow
and ice build-up can lead to malfunction or
personal injury from thawing and refreezing
in garage.
4. Always wear eye protection when cleaning
or servicing the snowblower.
5. Do not work under any part of the tractor or
snowblower, unless it is securely supported
by safety stands.
6. Make sure all shields and guards are
securely in place following all service,
cleaning, or repair work.
7. Do not modify or alter this equipment or any
of its components or operating functions. If
you have questions concerning
modifications, consult with your dealer.
TRANSPORTATION
1. If the tractor/snowblower is to be driven on
public roads, it must be equipped with an
SMV (Slow Moving Vehicle) sign. Check
local traffic codes that may apply to unit
usage on public roads and highways in your
area.
2. Be alert for all other traffic when driving the
tractor/snowblower on public roads or
highways.
STORAGE
1. Before storing the snowblower, certain pre-
cautions should be taken to protect it from
deterioration.
2. Clean the snowblower thoroughly.
3. Make all the necessary repairs.
4. Replace all Safety Signs that are damaged,
lost, or otherwise become illegible. If a part to
be replaced has a sign on it, obtain a new
safety sign from your dealer and install it in
the same place as on the removed part.
5. Repaint all parts from which paint has worn or
peeled.
6. Lubricate the snowblower as instructed under
"Lubrication" section.
7. When the snowblower is dry, oil all moving
parts. Apply oil liberally to all surfaces to
protect against rust.
8. Attach driveline shield safety chain around
driveline by passing it over the upper hitch
9. Store in a dry place.