John Deere GM2190 Lawn Mower User Manual


 
3 - OPERATION
You have purchased a three spindle mower designed especially for the mowing of
grassy areas where a highly professional cut is required without wasting time.
This mower is perfect for the maintenance of parks, private lawns, industrial parks,
airports, hospital grounds, schools, highways, golf courses, sport complexes, etc. The
GM21 series, for tractors up to 70 HP, come in working widths of 90” and 110”. The
mower can be either tractor front or rear mounted. On your mower, the tractor PTO
transmits its power through a driveline to a speed multiplier gearbox. A pulley is
attached to the pinion gear shaft of the gearbox which, via high resistance belts,
transmits power to pulleys coupled to the three individual spindle shafts. Blades are
secured to these shafts which turn at a high blade tip speed to cut the grass.
Our grooming mower comes equipped with 4 swivel wheels. Aside from regulating the
cutting height, the wheels are set in such a way as to allow the mower to follow the
contour of the terrain and give a precise, level cut even in undulating conditions.
3.01 - Operational Safety
CAUTION: Our mowers are designed considering safety as the most important
aspect and are the safest available in today’s market. Unfortunately, human
carelessness can override the safety features built into our machines. Injury
prevention and work safety, aside from the features on our mowers, are very
much due to the responsible use of the equipment. It must always be operated
prudently following with great care, the safety instructions laid out in this manual.
1. The use of this equipment is subject to certain hazards which cannot be prevented
by mechanical means or product design. All operators of this equipment must read
and understand this entire manual, paying particular attention to safety and
operating instructions, prior to using.
2. Do not operate the tractor and mower when you are tired, sick or when using
medication.
3. Keep all helpers and bystanders at least several feet from a rotary mower. Only
properly trained people should operate this machine.
4. When this machine is operated in populated areas where thrown objects could injure
persons or property, standard equipment safety chain shielding (which is designed
to reduce the possibility of thrown objects) must be installed.
5. The majority of accidents involve entanglements on the driveline, injury of
bystanders by objects thrown by the rotating blades, and operators being knocked
off the tractor by low hanging limbs and then being run over by the mower. Accidents
OPERATION 10 FRONTIER
G
ROOMING MOWERS OPERATORS MANUAL