Filter
Top Products
Rockshaft and 3-Point Hitch
PY80265,05GO852 –19–10SEP05–1/1
Adjusting Rockshaft Rate-of-Drop/ Implement
lock
PY4076 –UN–11AUG04
A—Rockshaft Rate-of-Drop Knob cum Implement
Lock
CAUTION: Excessive rate-of-drop may cause
damage or injury. Fully lowering implement
should require at least two seconds.
Rockshaft drops faster when a heavy implement is
attached. Adjust rate-of-drop knob so that it is slow
enough to be safe and prevent implement damage.
Turn rockshaft rate-of-drop knob (A), located under the
seat, clockwise to slow rockshaft drop.
Turn knob counterclockwise to increase rate-of-drop.
Rate-of-drop knob is also called implement lock. When
knob is fully screw in, implement will not lower down even
if position control lever is fully down. Use implement lock
while transporting implement.
PY80265,05GO853 –19–10SEP05–1/1
Attaching Tipping Trailer
PY4096 –UN–21AUG04
A—Auxiliary Port
B—Preselector Knob
Hydraulic power can be extended to tipping trailor through
auxiliary port (A). When preselector (B) is fully screwed-in,
hydraulic oil will move to tipping trailer. Use draft control
lever for lowering or raising of trailor.
NOTE: When tipping trailor is not attached to tractor, fully
screw-out preselector knob, otherwise rockshaft
will not function.
55-5
022607
PN=58