Filter
Top Products
Service—Every 1250 Hours
PY80265,05GO936 –19–10SEP05–1/1
Clean Transmission-Hydraulic Pickup Screen
PY4974 –UN–22APR05PY4973 –UN–22APR05
A—Cap Screws (2 used)
B—Screen Cover
C—Sight Glass
Remove two cap screws (A) and remove screen cover
(B).
1. Drain transmission-hydraulic oil. (See Change
Transmission-Hydraulic Oil and Filter in this section.)
2. Remove screen and examine it for damage. Replace if
necessary. Clean screen in solvent and blow dry with
compressed air.
3. Carefully install screen so the front of screen is
inserted in hole at front of differential case.
4. Fill system with transmission-hydraulic oil. (See
Changing Transmission-Hydraulic Oil and Filter in this
section.)
5. Check oil level at sight glass (C) after filling, and again
after operating for five minutes.
120-2
022607
PN=121