Filter
Top Products
RTK Radio 450 Performance
BA31779,00001D7 -19-23MAY11-1/1
JS56696,0000A51 -19-24AUG11-1/1
Operation of Vehicle Next to Base
Depending on the base station setup, operation of
vehicles directly under or next to the base may be limited.
The RTK Radio 450 system has both higher power and
higher signal sensitivity than standard (869MHz, 900MHz)
RTK. A consequence of this is that radio signals in the
immediate vicinity of the transmitter may be too strong
for the receiving radios. For base stations that serve
vehicles at both ≥20 km and ≤ 1 km from the base, it
may be necessary to add inline RF attenuators to the
rovers operating directly under the base. Attenuator
specications: RF load of 15 dBm, capable of 2W, inline
female TNC to male TNC.
EC Declaration of Conformity
Deere & Company
Moline, Illinois U.S.A.
The undersigned hereby declares that:
Product: John Deere RTK Radio 450
Part Number: PFA10096
fullls all relevant provisions and essential requirements of the following directive(s):
Directive Number
Certication Method
Radio and Telecommunications Terminal
Equipment Directive (R&TTE)
1999/5/EC Annex IV (Notied body)
The product is in conformity with the following standards and/or other normative documents:
EN 60950-1: 2006
EN 60950-22: 2006
ETSI EN 301 489-1: 2008 (v.1.8.1)
ETSI EN 300 113-1: 2009 (v.1.6.2)
ETSI EN 300 113-2: 2009 (v.1.4.2)
Notied body involved: Nemko AS
Gåsevikveien 8
2027 Kjeller, Norway
Identication mark: 0470
Name and address of the person in the European Community authorized to compile the technical construction le:
Brigitte Birk
Deere & Company European Ofce
John Deere Strasse 70
Mannheim, Germany D-68163
EUConformity@JohnDeere.com
Place of declaration: Kaiserslautern, Germany Name: Aaron M. Senneff
Date of declaration: 18 May 2011 Title: Engineering Manager, John Deere Intelligent Solutions
Group
Manufacturing unit: John Deere Intelligent
Solutions Group
PC14001 —UN—24AUG11
40-4
092711
PN=31