Filter
Top Products
Diagnostic LEDs
DK01672,00000F2 -19-13JUL11-1/1
DK01672,0000174 -19-09AUG11-1/2
DK01672,0000174 -19-09AUG11-2/2
Diagnostic LEDs
A key aid to gain insight into the working state of the RTK
Radio 450 system are the LEDs on both the RTK radio
and the in-line amplier (USA and Canada only). These
diagnostic lights can be used during setup, maintenance
and troubleshooting.
RTK Radio 450 LEDs
There are three radio LEDs. They can be seen after the
radio has been powered. They are viewed through a
small window on the front of the radio.
The LEDs can be used to determine
□ Is the radio powered?
□ Is the radio congured as a Base Station or a vehicle?
□ Is the radio searching or linked?
□ Is the radio in conguration mode?
The radio enters conguration mode when parameters are
being read/set or when diagnostics are being retrieved.
While in congure mode, the radio does not transmit or
receive communications.
The meanings of the radio LED states are provided in the
table below.
PC13863 —UN—13JUL11
LED Window
A—LED Window
PC13864 —UN—13JUL11
Radio LEDs Table
35-1
092711
PN=26