Filter
Top Products
Assembly
The tiller. except the handle, throttle
control, wheels, tine assemblies and
controls, is fully assembled, packed
and shipped in one container.
Depth Bar
1 Remove the tiller and all parts from
the carton. Make certain that all
loose parts and literature have been
removed before the carton is
discarded.
2 Attach the depth bar to the
tailpiece with the clevis pin and
spring pin. (See fi~ure 1.)
Figure 1
Tine Assembly
1
Place the first outer tine assemb.ly on
the tine shaft and fasten with the
two hex head cap screws 7/16-20 x
2%" long and two hex locknuts
7 /16-20. Repeat for the second tine
assembly. (See figure 2.1
Note: Be sure the tines are assembled
so the sharpened edge enters the soil
first.
.
.
Figure 2