Filter
Top Products
Assembly
Controls
Caution: If the belt cover (see page 3)
is removed, you will not have any
neutral. This belt cover contains the
belt trapout around the engine pulley.
The control rod must be assembled
exactly as shown in the assembly
instructions or you will not have a
neutral.
Note: For ease of assembly place the
control lever in the number one
position when installing the belt cover.
(See figure 7.)
Figure 7
Throttle Control
Place the throttle control through the
handle panel and fasten with two # 8
self-tapping screws. (See figure 8.)
Figure 8
9