Jacuzzi Whirlpool Spa Hot Tub User Manual


 
www.clearcreekspas.com
OPERATION
Normal Operation/Whirlpool System
You can enjoy the spa with or without activating the whirlpool. Either way, bathing in your spa can be pleasurable,
as well as therapeutic. After a busy, stressful day, you can look forward to soaking in your spa in still water with no
turbulence—only the gentle warmth of the soothing and relaxing water.
For a more invigorating spa experience, you can take advantage of the built-in whirlpool system. To do this, press
the JETS button for low or high speed JETS. Sit or recline in the spa so you are comfortable. Since all the jets are
directionally adjustable, you can direct a jet toward an area where muscles feels tense or stiff. The warmth of the water
and the stimulating water flow from the jets will pleasantly increase circulation.
For the total whirlpool effect and all over feeling of well being, you can adjust all jets so they point in a clockwise or
counterclockwise direction to circulate the air and water mixture in a circular motion all about the spa.
Air Blower
The spa features a built-in air blower and factory
drilled air holes in the seats of the spa to add to you
enjoyment.
The blower sends air to a channel located under the
spa's seats; this air is distributed through the air holes,
and as the pressurized air is released from the holes, tiny
bubbles are formed. These bubbles travel upward
through the water and expand until they reach the
surface and burst. The exciting visual effect of the
bursting bubbles contributes to the overall hydromas-
sage experience.
DIRECTIONALLY ADJUSTABLE
WHIRLPOOL JETS
FULLY ADJUSTABLE
WHIRLPOOL JETS
Water Rainbow
The Water Rainbow will add the soothing sound of a
waterfall to your bathing pleasure as well as provide a
beautiful cascade of shimmering water for an exciting
visual effect.
Activate the waterfall feature by rotating downward
the flow control lever located on the left side of the spout.
Use this lever to adjust the amount of water flowing
through the Water Rainbow. The waterfall effect will be
greatest in the high-speed JETS mode. Turning OFF the
flow at the fully adjustable jets will dramatically increase
flow through the Water Rainbow.
CAUTION: The water circulating through the Water
Rainbow spout is not fresh water and therefore is
WATER RAINBOW
Silent Air Induction
The intensity of the whirlpool action is determined by
how much air is induced into the water. You control this
by adjusting the air induction control knobs located on
spa rim. For maximum air induction, rotate each control
knob fully counter clockwise to the largest circle. For
fewer air bubbles, decrease the amount of air induction
by rotating the control knobs clockwise. When the knobs
are turned to the smallest circles, only water is being
circulated. (Refer to illustration below.)
INCREASE AIR FLOW
(COUNTERCLOCKWISE)
DECREASE AIR FLOW
(CLOCKWISE)
NOT suitable for drinking.
AIR INDUCTION CONTROLS
8