Filter
Top Products
Page 41
J-400 Series
12.5 Locking Filter Cycles
You may keep all lter cycle programs from being inadvertently altered
by electronically “locking” them.
To Lock All Filter C
ycles: Press CYCLE button, then
within 30 seconds, press DISPLAY
, MODE and
WARMER buttons within ve seconds each. A padlock
symbol will appear on the screen. In this state, the status of the cycle
program may be checked, but may not be altered.
To Unlock Filter C
ycles: Press DISPLAY , MODE
and COOLER buttons within ve seconds each.
12.6 Temperature Setting Lock
The spa’s temperature setting can be locked to prevent unauthorized
changes. When locked, all other spa buttons and functions remain
undisturbed.
To Lock Temperature Setting: Press WARMER or
COOLER button to display temperature setting, then
immediately press the DISPLAY
, MODE , and
WARMER buttons within ve seconds each. A padlock symbol
will appear on the screen.
To Unlock Temperature Setting: Press WARMER or
COOLER button to display temperature setting, then
immediately press the DISPLAY
, MODE , and
COOLER buttons within ve seconds each.
12.7 Programming the Change Filter Reminder
Your new spa is equipped with a programmable “Change Filter” reminder
icon that ashes on the control panel display after a specied
number of days. It is designed to remind you to clean the skimmer
lter cartridge on a regular basis but does not affect spa operation
in any way. The “Change Filter” reminder must be reset at each
lter cleaning interval. It offers a selectable range from 10-120 days or
can be disabled (turned off). We recommend an initial setting of 60 days
(2 months) to remind you to check your lters after your rst 2 months
of operation. At this time, you can easily determine whether you need to
change this interval by visually inspecting the lter cartridge an polishing
bag.
Note: This reminder must be reset at each lter cleaning interval. Refer
to section 13.1 for lter cleaning instructions.
LOCKED
LOCKED
LOCKED
LOCKED