Jacuzzi J - 270 Swimming Pool Vacuum User Manual


 
J-200
E
Lift unthreaded lter
cartridge from skimmer
well.
F
Rinse debris from lter
cartridge pleats using
a garden hose and
high-pressure nozzle.
Start at the top and
work downward to the
handle. Repeat until all
pleats are clean
Trapped
Air
Bubbles
Cartridge
G
Submerge lter cartridge
in spa. Tilt threaded
end upward to remove
trapped air bubbles,
then keep cartridge
submerged to prevent
air entrapment during
installation (step H).
(Inside Spa View)
H
Install lter cartridge
back onto wall
tting by rotating
the cartridge handle
clockwise. DO NOT
OVERTIGHTEN!
(Filter Cover Back View)
I
Install clean skimmer
bag back onto the lter
cover clips as shown.
(Inside Spa View)
J
Install lter cover by
sliding it down into
position over mating
spa retainer clips. Turn
spa power back on
after skimmer cover is
installed.
Periodically, the lter cartridge will need a more thorough cleaning to
remove imbedded oils and minerals. For this, we suggest cleaning as
illustrated in step “F”, followed by soaking the lter overnight in a plastic
container lled with a solution of water and specially formulated lter
cleanser available from your authorized Jacuzzi dealer. The average life
expectancy of each lter is approximately two years with proper care and
water quality maintenance. Replacement cartridges may be purchased
from your authorized Jacuzzi dealer.
34