Jacuzzi J-270 Hot Tub User Manual


 
page 33


 
13.8 Panel Displays OH
DO NOT
ENTER SPA!
and the low speed jets pump 1 and optional circulation

Contact your authorized Jacuzzi dealer or qualified service technician.
13.9 Panel Displays - - -

the spa is deactivated. A problem has been detected
which could cause damage to the spa or its components.
Contact your authorized Jacuzzi dealer or qualified service
technician.
14.0 Troubleshooting Procedures
In the event your Jacuzzi
®
spa is not working the way it should, please
first review all the installation and operating instructions in this manual
and check the message on the panel display. If you are still not satis-
fied it is working properly, please follow the appropriate troubleshooting
instructions below. Note: If any of the supply cords to the accessories
are damaged, they must be replaced by authorized service personnel.
Contact your authorized Jacuzzi dealer or qualified service technician.
14.1 None of the Components Operate (e.g. Pump, Light)

1. Is there power to the spa?
2. Is the household circuit breaker tripped?
3.
Contact your authorized Jacuzzi dealer or qualified service
technician.
14.2 Pump Does Not Operate But Light Does

1. If no water movement is detected, make sure power is going to the
spa and check the water level. If it does not solve the problem, con-
tact your authorized Jacuzzi dealer or qualified service technician.
 
