Filter
Top Products
Attention New Spa Owner!
Congratulations on the purchase of your new Jacuzzi® spa! The following
is a list of automated functions performed by your spa. These functions are
listed below in an attempt to alleviate any operational concerns you may
maintenance recommendations you should observe on a regular basis to
protect your new investment.
Automated Operations
-
for the duration of the cycle. Note: this function only occurs during the rst
ltration/heating cycle each day.
Maintain Healthy Spa Water
Always maintain your spa’s water chemistry within the following parameters
pH 7.4-7.6
Free Chlorine 3.0-4.0 ppm
Free Bromine 2.0-4.0 ppm
Total Alkalinity 100-120 ppm
Calcium Hardness 150-250 ppm
Required Filter Maintenance
provides unsurpassed water quality! To ensure maximum water quality at
instructions.
Required Water Replacement
You should replace the spa’s water every 3 months. The frequency de-
pends on a number of variables including frequency of use, number of us-
ers, and attention paid to water quality maintenance. You will know it is time
for a change when you cannot control sudsing and/or you can no longer get
the normal feel or sparkle to the water, even though the key water balance
additional information.