10.7 Filtration Modes for Spas with Circulation Pump Option
If your spa is not equipped with the circulation pump option, disregard
this section and refer to page 23 for lter cycle programming details.
Standard Filtration/Heating Modes (F0-F3)
(Heater automatically turns on during any heat call while in any
Standard mode).
this is the factory default setting.
Economy Filtration/Heating Modes (F4-F6)
(Heater can only turn on during an active lter cycle while
in any economy mode).
Lock Modes (L1-L2)
-
will continue to operate as programmed in this mode.
prior to choosing lock mode. The spa continues to perform the
selected.
Filter Cycle Setup Example
Note: start time is approxi-
mate and may vary slightly from day to day.