Filter
Top Products
English-46
MAINTENANCE
Blade replacement
• Remove blade bolt by turning
counterclockwise.
• Install new or re-sharpened blade with
stamped “GRASS side” facing towards
ground/grass (down) or “THIS SIDE UP”
facing deck and cutter housing.
• Install and tighten blade bolt securely.
Tightening torque 90 ft/lb (122 Nm).
WARNING!
Blades are sharp. Protect your
hands with gloves and/or wrap
blades with a heavy cloth when
handling.
8011-671
1. Blade
2. Center hole
3. Star
4. Cutter housing
5. Blade bolt (special)
Blade attachment, principal
IMPORTANT INFORMATION
To ensure proper assembly, center hole in
blade must align with star on cutter
housing,
IMPORTANT INFORMATION
Special blade bolt is heat treated. Replace
with a Husqvarna bolt if required. Do NOT
use lower grade hardware than specified.