Filter
Top Products
English-15
CONTROLS
1. Recoil Starter Grip
Pull the recoil starter grip slowly until you feel
compresion, then pull it briskly.
Normally this engine will not backfire. If you
get backfires, contact your Husqvarna dealer
for service.
2. Ignition Switch
Theignitionkeyswitchisplacedonthe
control panel.
IMPORTANT INFORMATION
Do not let recoil cord snap back by itself.
This may damage the cord or the recoil
starter assembly.
8011-498
R
ecoil starter grip
8011-693
Ignition key