Husqvarna WG4815P/968999278 Lawn Mower User Manual


 
English-29
OPERATION
Stopping
Emergency stop
Release both hands from the operator
presence lever handles.
When both operator presence levers return to
their outer position, the engine will quit and
the mower will stop.
or
Pull both motion control levers firmly against
handle grips and hold them securely in place.
Use thumb latches to lock both motion control
levers in neutral positions. Then stop engine
by pulling throttle control back and shut off
the key switch.
Normal operating stop
1. Pull both motion control levers firmly
toward the handle grips to stop forward
motion.
2. Use thumbs to lift thumb latches into the
neutral slots.
3. Move the throttle control to the slow
position.
4. Move blade engagement control to the
off position.
5. Move shift lever to the neutral position.
6. Stop engine, refer to “Stopping the
Engine” on page 30.
Braking
Squeeze both motion control levers towards
the handle grips. If desired secure them using
the thumb latches for parking brake.
IMPORTANT INFORMATION
Close fuel valve at the end of each mowing
job.