Husqvarna WG4815P/968999278 Lawn Mower User Manual


 
English-44
MAINTENANCE
Checking the Blades
In order to attain the best mowing effect, it is
important that the blades are well sharpened
and not damaged.
Bent or cracked blades or blades with large
nicks must be replaced.
Check the blade mounts.
Damaged blades should be replaced when
hitting obstacles that result in a breakdown.
Let the service workshop decide whether the
blade can be repaired/ground or must be
replaced.
Brake rod adjustment
1. Make sure the rod is installed into the
proper hole in the brake arm. The brake
rod should be in the bottom hole on the
brake arm.
2. To increase braking, turn the wing nut
down on the rod. Do not turn the wing nut
down too far as this will result in a
constant braking action and will
excessively wear the brake lining and
cause premature failure.
Under side of rear deck
Remove grass and debris.
8011-604
Check the blades
WARNING!
Blades are sharp. Protect your
hands with gloves and/or wrap
blades with a heavy cloth when
handling.
IMPORTANT INFORMATION
The replacement or sharpening of blades
should be carried out by an authorized
service workshop.
8011-774
Brake rod position