Filter
Top Products
English-37
MAINTENANCE
Checking the Safety System
The machine is equipped with a safety
system that prevents starting or driving under
the following conditions.
The engine can only be started when:
1. The blades are disengaged.
2. The neutral bail must be in the locked
position.
Make daily inspections to ensure that the
safety system works by attempting to start the
engine when one of the conditions is not met.
If the machine starts when one of these
conditions is not met, turn the machine off
and repair the safety system before using the
machine again.
Functional check
Check the function of the safety electrical
system on a regular basis.
1. Engine must stop if blades are engaged
without operator presence levers held
down.
2. Engine must stop if transmission is taken
out of neutral without holding down
operator presence levers.
3. Engine must not start unless blades are
off and transmission is in the neutral
position.
8011-477
Condition for starting
WARNING!
Do not operate the mower if the
interlock safety system allows
operating or starting in any
unsafe condition.