Filter
Top Products
English-24
OPERATION
8. Warm engine momentarily, then
disengage the choke until engine runs
smoothly, approximately 1/2 throttle.
9. Depress one operator presence lever.
Engage the blades and set the desired
rpm. The best cutting and bagging is
obtained with engine at top rpm. Grip
motion control levers before shifting
gears.
WARNING!
Be sure all persons are
clear
of area before engaging the
blades.
IMPORTANT INFORMATION
To prolong spindle bearing clutch and belt
life engage and disengage blades at
approximately ½ throttle.
8011-683
P
resence lever
8011-474
B
lade engaged