Filter
Top Products
English-27
OPERATION
• Drive so that clippings are discharged
onto the area that has been cut. Have
the cut area to the right of the mower.
This will result in more even distribution
of clippings and a more uniform cut. To
avoid clippings spraying on roads etc,
mow the first two patterns in opposite
direction.
• Begin with a high cutting height and
reduce it until the desired mowing result
is attained.
The average lawn should be cut to 2 1/2"
(64 mm) during the cool season and to
over 3" (76 mm) during the hot months.
For healthier and better looking lawns,
mow often after moderate growth.
For best cutting performance, grass over
15 cm (6") in height should be mowed
twice. Make the first cut relatively high;
the second to the desired height.
• The mowing result will be best with a
high engine speed (the blades rotate
rapidly) and low speed (the machine
moves slowly). If the grass is not too long
and dense, the driving speed can be
increased without noticeably
depreciating the mowing result.
• The finest lawns are obtained by mowing
often. The mowing becomes more even
and the grass clippings more evenly
distributed over the mown area. The total
time taken is not increased as a higher
driving speed can be used without poorer
mowing results.
• Avoid mowing wet lawns. The mowing
result is poorer because the wheels sink
into the soft lawn, clumps build, and the
grass clippings will fasten under the
cowling.
8011-409
Mowing patterns