Filter
Top Products
English-25
OPERATION
Gearbox
The gear drive machines have a 5-speed
gearbox. The gear selector is placed under
the control panel.
Only shift gear when the machine is standing
still and on level ground.
Running
1. Depress one operator presence lever
and shift transmission to the desired
gear.
2. Unlock the motion control levers by
pushing the neutral bail down out of the
neutral slots. Slowly release both levers
at the same time to begin forward
motion.
3. The steering system of this mower uses
individual right and left motion control
levers on the handle bars. Squeezing the
lever will reduce tension on the wheel
drive belt eliminating power to that
wheel. With the opposite wheel still
under power a turn is accomplished.
4. If the motion control lever is squeezed
even tighter the brake will be applied to
that wheel and a tighter more abrupt turn
is accomplished. - turn left by squeezing
the left hand lever or turn right by
squeezing the right hand lever. If you
squeeze both levers the mower will stop.
8011-482
Gear selector
8011-403
1. Operator Presence Lever
2. Drive Lever
3. Neutral Bail
4. Handle
E-handle with bail in neutral position