Filter
Top Products
• Use : Sawing concrete blocks, cellular
concrete, refractory bricks, etc.
Any application not corresponding with
the intended use (use of a saw blade,
abrasive disc, etc) is prohibited.
1
Use
• Can be transported on 4 wheels
• Front wheel lock
• Fork rail
• Blade shaft RPM :
- electric : 1600
- petrol : 2045
• Electrical protection : IP 55.
• Depth of cut :
- 160 mm with Ø 400 mm
- 180 mm with Ø 450 mm
- 200 mm with Ø 500 mm
- 240 mm with Ø 600 mm
• Length of cut : 520 mm
• Dimensions (mm) (L x W x H) :
1400 x 690 x 1550
• Unladen weight : 150 à 175 Kg
• Disc cooling by water spray into the disc
casing.
• Minimum tank capacity : 57 liters
• Water pump : 14 l/mn
• Electricity supply :
- 230 V : H07-RNF 3 x 1,5
2
- L 3 m
- 400 V : H07-RNF 5 x 1,5
2
- L 3 m
- 110 V : H07-RNF 3 x 2,5
2
- L 3 m
2
Technical specifications
• On receiving the machine check its
condition.
• Always keep it perfectly clean.
• Check the supply cable and the extension
lead periodically.
• Always keep alert when working.
• Check the mounting of the components
(abnormal vibration).
VEASE FIG. 1
11 - Chassis-tank
12 - Rear wheel
13 - Front wheel
14 - Water pump
15 - Head locking handle
16 - Adjustable wheel
17 - Set of spanners
18 - Drain plug
19 - Motor
10 - Circuit breaker
11 - Operating handle
12 - Disc casing
13 - Screen
14 - Movable table
15 - Table stop
16 - Movable table stop
17 - Manufacturer's plate
18 - Pedal
19 - Stop
20 - Tap
21 - Clamping wheel
10
MANDATORY
INDICATION
INFORMATION
INSTRUCTION
WARNING
PROHIBITION
These signs give advice
concerning your safety
This symbol indicates that the
machine is in conformance with
the applicable European directive.
• Tools :
Diamond/abrasive blade
- Ø 400 to 600 mm
- bore 25.4 mm (1")
The disc cutter is designed to provide safe
and reliable service in operating conditions
corresponding with the instructions, but it
can present dangers for the user and risks
of damage, consequently regular on site
inspection is necessary to ensure :
• Perfect technical condition (use for the
purpose for which it is intended and
taking into account any risks, and
correction of any malfunction
detrimental to safety).
• Use of a diamond disc for water
lubricated cutting of marble, stone,
granite, brick and facings (porcelain,
glazed tiles, ceramics, etc). The use
of any other disc is forbidden
(abrasive, saw, etc).
• Competent personnel (qualifications,
age, training, education) who have
studied the manual in detail before
starting work : any fault of an electrical
or other nature must be checked by a
competent person (electrician,
maintenance foreman, authorized
dealer, etc).
• That the warnings and instructions
marked on the machine are followed
(adequate personal protection, correct
use, general safety instructions, etc).
• That no modification, transformation
or addition is detrimental to safety and
that it is carried out without prior
authorization from the manufacturer.
• Respect of the maintenance intervals
and periodical checks recommended.
• That only genuine spare parts are
used for repairs.
SPECIAL INSTRUCTIONS
Saw blade
Carborundum
disc
5
Inspection before starting
• Petrol engine machine (consult the
engine maintenance manual)
- Check that the fuel tank is full.
- Check that the engine oil level is
correct. As the engine often operates at
an angle, check the oil level (with the
engine horizontal) frequently to ensure
that it never falls below the second
mark on the dipstick.
- Don't let run the motor under its speed,
the rotation speed is given by the
maximum lever positioning.
- For starting up refer to the engine
handbook.
Please read the instructions for
use prior to operating the
machine for the first time.
The operator must wear
protective clothing
appropriate to the work he
is doing. We recommend
that this includes both eye
and ear protection.
Any persons not involved in the
work should leave the working
area.
The use of ear protection is
mandatory.
The working area must be
completely cleared, well lit and
all safety hazards removed (no
water or dangerous objects in
the vicinity).
Use blades suitable for the work
to be done (speed, geometry,
application, etc.).
Take into account the working
conditions from a health and a
safety point of view
4
Handling - transport
[VEASE FIG. 2]
3
Inspection-Description of the
machine
1,5 KW 110 V 186 70 0,21
2,2 KW 240 V 189 76 0,13
7,5 KW 440 V 186 82 0,23
HONDA
GX160
MODEL
POWER
LEVEL
Lwa (dB)
EN ISO 3744
Lpa (dB)
EN ISO 4871
G ENV
25349
PRESSURE
LEVEL
VIBRATION
LEVEL
106 94 1
English
TYPETYPE SERIAL
POWER
VOLTAGE
FREQUENCY
INTENSITY
FABRICATION
YEAR
WEIGHT
MAXI TOOL
BORE
SPEED
MANUFACTURER
MASSE UTILE Kg
mm
mm
Ø MAXI OUTIL.
Ø ALESAGE
T/MN - RPM
N° SERIE
ANNEE DE
FABRICATION
PUISSANCE kW
Hz
V
A
PLAGE DE
TENSION
FREQUENCE
INT. UTIL.
Instruction plate