Filter
Top Products
2 – English
Use
• Read through the Operator’s Manual carefully and make sure
you understand its contents before using the Auto Mower.
• Check that there are no
stones, twigs, tools, toys or
other objects on the lawn that
can damage the blades or
cause the mower to stop.
• Start the Auto Mower in accordance with the instructions.
Keep your hands and feet away from the rotating blades.
Never put your hands or feet underneath the mower.
• Make sure that no one is standing in front of the Auto Mower
when you start it.
• Never lift up the Auto Mower or carry it around when it is
running.
• Do not allow anyone who does not know how the Auto Mower
works and behaves, especially children, to go into the working
area while it is mowing.
• Do not let persons who do not know how the Auto Mower
works and behaves use the mower.
• Do not put anything on top of the Auto Mower or its charging
station.
• Do not allow the Auto Mower to be used if any part is seen to
be defective or faulty. This includes the cutting disc, blades,
nuts, bolts and cables.
• Do not use the Auto Mower if the power switch does not work.
• Always switch off the Auto Mower by means of the power
switch when it is not in use.
Transport
SAFETY REGULATIONS
STOP
WARNING!
Never move the Auto Mower with the cover
lowered. The blades can then rotate and
cause personal injury.
!
STOP
Care
• Inspect the Auto Mower weekly and replace any damaged
parts. Check in particular that the cutting disc and blades are
not damaged. Change all the blades at the same time if
replacement is necessary so that the rotating parts are
balanced, see the “Maintenance” section.
• Clean the charging station’s contact plates and the Auto
Mower’s charging pins using a fine abrasive cloth if necessary.
If black oxide forms on the Auto Mower’s charging pins this
can be a sign of inferior electrical contact between the
charging pins and the charging station’s contact plates.
Check the installation of the charging station, refer to “Instal-
lation, step by step”. Always check whether cleaning is
necessary with the first usage after the winter break.
• Contact your local dealer when changing damaged or worn
parts.
• Old batteries that have been replaced should be returned for
disposal to your dealer or to a recycling station.
Moving the Auto Mower from or within the mowing area:
1. Lift the cover. The long beep after the cover has been lifted
indicates that the cutting disc has stopped.
2. Enter the first digit of your personal code to prevent the
theft alarm being activated.
3. Switch off the power switch if the Auto Mower is to be
moved outside of the mowing area. Otherwise this does not
need to be switched off.
4. Carry the Auto Mower by its handle.
Pack away the Auto Mower in the original packaging when
transporting over long distances.
!
WARNING!
The power switch must be switched off with
all work on the mower’s chassis such as
cleaning, setting the cutting height or
replacing the blades. The power switch must
always be switched off when the machine is
turned upside down.
If the mower’s start-up signal has been
switched off you will not hear beeps warning
for the start of the cutting disc (5 beeps
during 5 seconds).