Filter
Top Products
English – 43
LUBRICATION
2. Pedal mechanism in frame tunnel
Lubricate the pedal mechanism in the frame tunnel.
Remove the cover from the frame tunnel by
undoing the screws, two on each side
Pump the pedals and lubricate the moving parts
using an oil can
Lubricate the wires connected to the brake and
drive pedals using an oil can
Lubricate as described under “Chains in frame
tunnel” before refitting the cover over the frame
tunnel.
3. Chains in frame tunnel
Remove the cover from the frame tunnel, see step
2.
Lubricate the chains in the frame tunnel using an oil
can or motorcycle chain spray.
Lubricate the shaft of the control wire pulleys with
grease. Press the rollers to the side and brush the
shaft with grease.
Refit the cover over the frame tunnel.
4. Triangular link and joints
Lubricate the triangular link and the joints on the
cutting height adjustment strut behind the right front
wheel.
Lubricate using oil can.