Filter
Top Products
18 – English
Stopping the engine
Preferably allow the engine to idle for a minute to
obtain normal working temperature before stopping
it if it has been working hard.
1. Lift up the cutting unit by pulling the lever back
to the locked position.
DRIVING
WARNING!
Never drive the machine on
ground at an angle of more than
15°. Mow slopes upwards and
downwards, never across. Avoid
sudden changes in direction.
MAX 15
Release lever
The release control must be pulled out in order for
the Rider to be moved when the engine is shutoff.
The diagram shows the release lever in the out
position.
2. Move the throttle control to the MIN. position.
Turn the ignition key to the STOP.
3. When the Rider is at a standstill, press down the
parking brake and push in the locking button.