Filter
Top Products
English – 19
MAINTENANCE
Maintenance interval in
hours
Daily main-
tenance
before after
Weekly
3)
main-
tenance
At least
once a
year
Maintenance schedule
The following is a list of the maintenance which should be conducted on the machine. For the items which
are not described in these instructions go to an authorised service workshop.
Check for fuel and oil leakage - ❍
Check the parking brake 23 ●
Check the engine oil level (when you
refuel) 45 ●●
Check the fuel pump air filter 24 ●
Check the seat safety switch 28 ●
Check the lift lever safety switch 28 ●
Check the parking brake safety switch 28 ●●
Check/clean the engine cooling air intake 26 ●
Check the cutting unit: 31 ●
• blades are secure 39 ●
• condition of blades (sharpness,
shape, etc.) 39 ●
• blade synchronisation (90° between
BioClip) 39 ●
Check steering wires (for play, etc.) 22 ●
Check fasteners (screws, nuts, etc.) - ❍
Start engine and blades, listen for noise - ❍
Clean underside of cutting unit 36 ●
Clean transmission air intake 26 ●●
Check battery acid level 27 ●
Check transmission oil level 46 ●
Check the condition of belts, pulleys, etc. - ❍
Check for damage - ❍
Check tyre pressures (60 kPa) 29 ●
Check for damage to wire guide at
articulated joint - ❍
Clean the area around the engine
thoroughly - ❍
Clean thoroughly around transmission - ❍
Clean all belts, pulleys, etc. 42 ●
Lubricate belt tensioner (nipple) 44 ●
Lubricate triangle link 43 ●
Lubricate the driver’s seat 44 ●
Lubricate all wires 42 ●
Lubricate bearing surfaces on cutting unit 42 ●
Clean inside frame tunnel - ❍
Lubricate pedal mechanism inside frame
tunnel 43 ●
Lubricate the gear lever 46 ●
Lubricate the parking brake wire 46 ●
25 50 100 300
PageMaintenance