Filter
Top Products
English – 15
Before starting
• Read the safety instructions and information on
the location and function of the controls before
starting (see pages 7–14).
• Conduct daily maintenance before starting (see
maintenance schedule on page 19-20).
• Adjust the seat to the required position.
Starting the engine
1. Lift up the cutting unit by pulling the lever back-
wards to locked position (transport position) and
apply the parking brake.
DRIVING
4. Turn the ignition key to the start position.
3. If the engine is cold move the choke lever
backwards to its end position.
2. Move the throttle control to the middle position.