Filter
Top Products
English-50
LUBRICATION
Lubrication Schedule
General
Remove the ignition key to prevent unintentional movements during lubrication.
When lubricating with an oil can, it must be fi lled with engine oil.
When lubricating with grease, unless otherwise stated, use a high grade molybdenum disulphide grease.
For daily use, the machine shall be lubricated twice weekly.
Wipe away excess grease after lubrication.
It is important to avoid getting lubricant on the belts or the drive surfaces on the belt pulleys. Should this happen,
attempt to clean them with spirits. If the belt continues to slip after cleaning, it must be replaced. Gasoline or other
petroleum products must not be used to clean belts.
8011-673
Lubrication schedule and Symbol Key
12/12= Every year Lubricate with grease gun Lubricate with oil can
1/52= Every Week Oil change Level check
1/365= Every day Filter change