Filter
Top Products
English-27English-27
OPERATION
8011-527
Start conditions
8011-753
Raise the mower deck
Starting the Engine
1. Sit on the seat.
2. Raise the mower deck by pulling the lifting
lever backward to the locked position
(transport position).
3. Activate the parking brake.
Before Starting
• Read the sections “Safety Instructions” and
“Controls” before starting the machine.
• Perform the daily maintenance before
starting (see Maintenance Schedule in the
Maintenance section).
• Check that there is suffi cient fuel in the fuel
tank.
• Adjust the seat to the desired position.
The following conditions must be fulfi lled before the
engine can be started:
• The driver must be seated on the seat.
• The blade switch for engaging the mower
blades must be depressed.
• The parking brake must be on.
• Both steering controls must be in the locked
(outer) neutral position.
Roll bar and safety belt
Operate the unit with the roll bar in the raised and
locked position and use the seat belt. There is no
rollover protection when the roll bar is down. If it is
necessary to lower roll bar, do not wear the seat belt.
Raise the roll bar as soon as clearance permits.
WARNING!
The seat belt must be used when
the roll bar is in upright position.
8011-464
Roll bar in upright position