Husqvarna HUV 4214 Utility Vehicle User Manual


 
Periodic Lubrication Schedule
PERIODIC SERVICE SCHEDULE
REGULAR INTERVAL SERVICE
Check for leaks around gaskets, ll plugs, etc.
Adjust valve clearance. See Briggs and
Stratton Vanguard Model 2900000 Service
Manual.Engine
Inspect, clean, and gap spark plug; replace if
necessary. See authorized dealer or trained
technician for service.
Replace air lter element. See Air Intake
System on page 42.
Engine air intake system
Check clamps for tightness; check hose for
cracks.
General vehicle
Check for loose hardware and tighten if
necessary.
Fuel lters Replace. Dispose of used lters properly.
Annual service by trained technician only
(or every 100 hours of operation, whichever
comes rst)
Clutch cover vent inlet lter (if equipped) Replace. Dispose of used lters properly.
WARNING
If any problems are found during scheduled inspection or service, do not operate vehicle until repairs
are made. Failure to make necessary repairs could result in re, property damage, severe personal
injury, or death.
PERIODIC LUBRICATION SCHEDULE
PERIODIC LUBRICATION SCHEDULE
REGULAR INTERVAL SERVICE
LUBRICATION
POINTS
RECOMMENDED LUBRICANT
First change 5 - 8 hours
additional change every 100
hours of operation or annually,
whichever comes rst
Change engine oil and oil lter
1
1 - 1/2 qt. (1.4L) with lter, 10W-30 API
classication SJ See Oil Viscosity
on page 39.
Change every 50 hours of
operation or semiannually
whichever comes rst
Driveshafts and bearing blocks
2
Chassis Lube (EP NLGI Grade 2)
Change every 100-400 hours
of operation or semiannually
whichever comes rst
Change front differential lubricant 5 oz. (170 mL) 80W90 Gear Oil
First change 50 hours
additional change every 100
hours of operation or annually,
whichever comes rst
Change rear transaxle lubricant
1 gal. (3.79 L) 10W-30 SF, SG, SH
2009 HUV 4214, HUV 4414, andHUV 4414-XP Owner’s Manual Page 33