Husqvarna HUV 4214 Utility Vehicle User Manual


 
Controls and Indicators
SERIAL NUMBER
SD0601-123456
P O BOX 204658
AUGUSTA GA 30917
190
Figure 4 Serial Number
CONTROLS AND INDICATORS
See General Warnings on page 10.
WARNING
Before allowing anyone to drive the vehicle, make sure the driver is familiar with all controls and
operating procedures.
Do not shift the Forward/Reverse handle while the vehicle is in motion.
Engine must be at idle before shifting the Forward/Reverse handle. Failure to do so may result in
injury to inattentive passengers and (or) damage to the vehicle.
To avoid unintentionally starting or rolling the vehicle, set the park brake, place the Forward/Reverse
handle in the NEUTRAL position, turn the key switch to the OFF position, and remove the key when
leaving the vehicle.
2009 HUV 4214, HUV 4414, andHUV 4414-XP Owner’s Manual Page 13