Husqvarna HUV 4213-G Utility Vehicle User Manual


 
Vehicle Specications
VEHICLE SPECIFICATIONS
SPECIFICATIONS HUV4213-GXP HUV4213-G
POWER SOURCE
Engine: 4-cycle OHV, 400 cc, 13.0 maximum HP @3600 RPM (per SAE J 1940/1349),
single-cylinder, air-cooled, with pressure lubrication system
Fuel system: Side-draft carburetor with oat bowl, xed jets, fuel lters, and impulse fuel
pump
Governor: Automatic ground-speed sensing, internally geared in unitized transaxle
Ignition: Transistor electronic ignition with electronic RPM limiter
Unitized transaxle: Fully synchronized forward and reverse with neutral (14.9:1 forward,
20.5:1 reverse) and differential lock feature
Electrical system: 12-volt, 500 cca at 0 °F (-17.8 °C), 650 at 32 °F (0 °C). 105-minute
reserve capacity and 35-amp charging capacity
Torque converter: Automatic, variable-speed, dry type
STEERING/SUSPENSION/BRAKES
Steering: Self-adjusting rack and pinion, Ackerman
Suspension:
Front: Independent A-arms with coil-over shocks
Rear: Semi-independent suspension with multi-leaf springs and dual hydraulic shocks
Brakes: Hydraulic brake system – self-adjusting drum brakes on each wheel with separate
hand-operated park brake
BODY/CHASSIS
Frame/Chassis: Twin I-Beam welded aluminum
Side and rear body: All aluminum
Cargo bed: Powder-coated steel
Front body: ABS/DR acrylic cap
Tires: 23 x 10.50 – 12 tubeless, 4-ply rated load range, front and rear
DIMENSIONS/WEIGHT
Overall length (box bed conguration) 123.4 in. (313.4 cm)
Overall width 54 in. (137 cm)
Overall height (at light bar) 75 in. (187.5 cm)
Wheelbase 80 in. (203 cm)
Ground clearance:
under differential under foot platform
6.6 in. (17 cm) 11.4 in. (29 cm)
Front wheel tread 43 in. (109 cm)
Rear wheel tread 44.5 in. (111 cm)
Weight (dry):
with all-terrain tread with turf tread
1106 lb. (493.4 kg)
1066 lb. (477.2 kg)
1063.5 lb. (482.4 kg)
1027.8 lb. (466.2 kg)
Forward speed 17-19 mph (27-31 km/h)
Governed RPM: FE400 Engine 3850 (±30) RPM
Page 40 2008 HUV 4213-G and HUV 4213-GXP Owner’s Manual