Filter
Top Products
Cleaning the Vehicle
CLEANING THE VEHICLE
Each vehicle is equipped with an ABS/DR acrylic front body and an all-aluminum rear body. The HUV4213 has a
powder-coated steel cargo bed. Use commercial automotive cleaning solutions with a sponge or soft cloth for normal
cleaning. A garden hose at normal residential water pressure is adequate. To remove oxidation or discoloration from
aluminum, use a commercially available aluminum cleaner paste and ne grade (No. 00) steel wool.
Husqvarna does not recommend any type of pressure washing or steam cleaning. Such a process will expose
electrical components to moisture. Moisture entering electrical components can result in water damage and
subsequent component failure.
Use non-abrasive wax products. Battery acid, fertilizers, tars, asphalt, creosote, paint, or chewing gum should be
removed immediately to prevent possible stains.
The front body is made of an ABS/DR acrylic cap material similar to the material used to manufacture hot tubs and
shower/tub units. Cleaning and repair techniques for the front body are the same as those used on conventional
acrylic sheet. Use cleaning and polishing products available at any hardware store where ABS/DR acrylic (hot tubs
and shower/tub units) are sold.
The seats of the vehicle will last longer with proper cleaning. Use a solution of 10% liquid soap and warm water applied
with a soft cloth. For imbedded dirt, a soft bristle brush may be used. For heavy soiling, difcult stains, or scratches,
blemishes, or other body damage, see the appropriate maintenance and service manual. See following NOTE.
NOTE: Dispose of waste water properly.
ACCESSORIES
There is a complete line of accessory equipment available from Husqvarna and our dealers/distributors. You can obtain
the name and phone number of your closest Husqvarna contact by visiting our web site at www.usa.husqvarna.com.
Care should be taken that these accessories are properly installed by trained technicians, and that they are used in the
manner for which they were designed. See following WARNING.
WARNING
• Custom cab assemblies, canopy tops, weatherproof enclosures, and windshields will not protect
occupants from ying objects.
• If the vehicle is equipped with an electric powered bed lift, remove the bed before servicing the
bed lift system.
ELECTRIC WINCH ACCESSORY
If your vehicle is equipped with an electric winch, read and follow all manufacturer safety warnings and instructions in
the winch operator manual, as well as the following WARNING and CAUTION statements. Make sure a winch warning
decal is afxed to the vehicle on the seat support panel next to the receptacle for the remote operation switch. See
Safety Decal and Feature Identication on page 4.
The winch kit available from Husqvarna includes a remote operation switch, which enables the operator to move away
from the vehicle and cable. See following WARNING and CAUTION.
WARNING
• Before beginning a winch operation:
– Turn the key switch to the OFF position, put Forward/Reverse handle in the NEUTRAL position,
and engage the park brake.
– Do not use winch while persons are seated on the vehicle.
• Stand to the side and away from the vehicle to operate winch.
Page 38 2008 HUV 4213-G and HUV 4213-GXP Owner’s Manual