Husqvarna HUV4210-E Utility Vehicle User Manual


 
Periodic Lubrication Schedules
Page 36 2008 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
PERIODIC LUBRICATION SCHEDULE – GASOLINE VEHICLES
REGULAR INTERVAL SERVICE
LUBRICATION
POINTS
RECOMMENDED LUBRICANT
Semiannually by owner
trained technician (or every
50 hours of operation,
whichever comes first)
Brake pedal shaft bearings
Dry Moly Lube (Husqvarna 603 00 00-
01)
Brake linkage and pivots
Dry Moly Lube (Husqvarna 603 00 00-
01)
Accelerator push rod pivots,
mounts, and shifter cable pivots
Dry Moly Lube (Husqvarna 603 00 00-
01)
Front suspension (5 fittings) Chassis Lube (EP NLGI Grade 2)
Brake slides
Dry Moly Lube (Husqvarna 603 00 00-
01)
Annually by trained
technician only (or every
100 hours of operation,
whichever comes first)
Check/fill unitized transaxle to
plug level
27 oz. (0.8 L) 80-90 WT. API Class
GL-3 or 80-90 WT. AGMA Class EP
Gear Lube
First change 100 hours –
additional change
every 200 hours of
operation, or annually,
whichever comes first.
Change engine oil and oil filter
32 oz. (0.95 L) without filter; 38 oz. (1.12
L) with filter
Figure 20 Lubrication Points – Gasoline Vehicles
1
2
3
4
5
6
7
4
7
3
4
3
4
2
2
1
1
4
4
3
6
5
5
3
3