CONTROLS
English-19
C
H
O
K
E
T
H
R
O
T
T
L
E
B
L
A
D
E
D
R
IV
E
C
H
O
K
E
T
H
R
O
T
T
L
E
B
L
A
D
E
D
R
IV
E
Blade switch
In order to engage the mower deck, pull the knob out;
the mower blades are disengaged when the knob is
depressed.
Circuit breaker
The circuit breaker provides protection for the electrical
system by (1) 15 amp circuit breaker. If the circuit
breaker trips, push the button to reset. If the condition
repeats, consult a dealer for inspection and repair.
Parking Brake
The parking brake is found on the operator’s left. Pull
the lever upward to activate the brake and downward
to release it.
The park brake is designed to hold the mower from
moving and is not intended for use in stopping the
mower while it is in motion. The engine will stop if the
park brake is engaged while the control levers are in
the drive position.
IMPORTANT INFORMATION
The machine must stand absolutely still
when applying the parking brake. Always
set the parking brake before dismounting.
Release the parking brake before moving
the mower.
Parking brake activated
8050-773
8058-018-1
Blade switch
8058-018-1
Circuit breaker